The fiber End-face inspection by FastCheck Pro inspector

FastCheck Pro inspector can rapidly detect the dirt and scratches on the surfaces of fiber optic end faces in fully automated executions. It is also able to generate easy-to-read reports for the further analysis afterwards.

The 3D vision simulation of the fiber End-face by BINNA2 Interferometer

The BINNA2 interferometer is capable of simulating 3D vision of the end-face fiber through an automatic one-second test process.

The Synchronized test of polarity and I&R losses by twoway fiber polarity and return loss meter

The twoway polarity and return loss meter uses the innovative design concepts to executing the automated test of I&R and the polarity losses simultaneously.

The ferrule end-face cleaning tool by Offsoon Mark II plus

Offsoon Mark II plus uses the precise gas-solvent-gas sequence through the touch-free tip to blow and remove contamination particles with over 95% cleaning efficiency for 2 seconds of the cleaning period.

Portable inspection of end-face by Autogetwifi inspector

As a portable end-face inspector, Autogetwifi Intelligent Fiber Endface Microscope not only detects the defects on the surface of the end face, it integrates a 3. 2'HD touch screen and PASS/FAIL LED indicator allowing images and results to be viewed without additional display.

The various functions Integrated into Optical Probe

The Optical Probe Integrated OPM, VFL, RJ45 connector order, and tracing features into a pocket-size of the case. The non-physical contact design for every single tip, effectively avoids potential damage in touching.

End face cleaning

The EasyCleaner-3 series of optical connector cleaners are specially developed for optical connectors. The maximum cleaning time exceeds 1000 times.They do not require cleaning solution and are easy to carry. With just a gentle press, dirt on the fiber end face can be removed, which can quickly and efficiently improve the reliability of communication services.