Fiber Optic Connectors & Assemblies
PLC Splitter Testing Solutions
The optical splitter divides a single input optical signal into multiple output optical signals according to a fixed splitting ratio, serving as an inductive passive device for achieving optical power distribution.
Scheme Introduction
This scheme uses tunable light sources, polarization controllers, and high-precision optical power meters to build the test optical path. Under the nominal working wavelength and rated input optical power of the device, the insertion loss, splitting ratio, uniformity, polarization-dependent loss (PDL), and return loss (RL) of the optical splitter are tested. Samples are taken from each output port in sequence, and data is collected for different polarization states to verify the splitting and distribution capability of the device, the consistency of port power, and the suppression level of end-face reflection. It is determined whether the device meets the specification requirements.
Core test parameters
1.Insertion loss (IL) at each output port: The total power attenuation generated at each output port after the input light passes through the optical splitter.
2.Split ratio:The percentage of the light power at a single output port compared to the total light power of all output ports. This is the splitting distribution ratio designed for the device.
3.Uniformity:The maximum difference in insertion loss among all output ports, indicating the consistency of the output power levels.
4.Polarization-dependent loss (PDL) at each output port: The maximum difference in insertion loss at the same output port as the light enters with different polarization states, reflecting the device's sensitivity to polarization.
5.Return loss (RL) at the input port: The level of reflected light generated at the input surface, within the device's internal structure, and returning along the original input port. The greater the reflection, the smaller the return loss.
6.Directionality:The ability to suppress cross-talk and reverse leakage light between output ports.
Output power and power stability test
Measures the output optical power of the tested component and continuously collects to observe the change of power over time, used to evaluate the output level and stability. The OPM optical power meter provides various modules and channel configurations, which can be combined with the test platform to construct a single-channel or multi-channel power measurement system.

Multi-channel optical power meter
Spectral performance test
Calibration of adjustable light source and power meter for spectral testing
Measure the central wavelength, spectral width and edge mode suppression ratio to evaluate the spectral characteristics of the laser output. Select a spectral analyzer according to the wavelength range, spectral width and edge mode suppression ratio requirements of the measured object, and correlate the spectral results with the polarization and power test results to form a complete performance record.

Multi-channel optical path switching
By using the optical switch to connect different measurement channels or testing instruments, the need for repeated plugging and unplugging is reduced, making it easier to construct multi-channel testing processes. OSW can be configured according to the number of channels and interface forms; for applications requiring light input monitoring, a testing system can be built in combination with a power monitoring scheme. The PER measurement link needs to be verified separately to avoid the impact on results due to the change of polarization state when switching the link.

Optical Switch
Optical fiber end face defect detection
FastCheck Pro Fully Automatic Fiber Endface Inspector
EasyGet WiFi Wireless Fiber Endface Microscope
MT SCOPE Fiber Endface Microscope
Check for contamination, scratches and other defects on the connection end face, reducing interference to power and polarization measurements caused by the connection status. FastCheck Pro supports automatic centering, focusing, exposure and measurement, suitable for bench-top detection and integration with automation; EasyGet WiFi supports wireless transmission, automatic analysis and report output; MT SCOPE comes with a touch screen and can independently complete on-site detection and determination. Specific interfaces require corresponding adapters.

Fiber Endface Inspector
End face cleaning
Offsoon Pro Fiber Endface Cleaning Machine
It adopts a non-contact cleaning method combining cleaning solution and dust-free gas to remove oil stains and adhered contaminants on the connection end face. It is recommended to confirm the end face condition following the "inspection - cleaning - re-inspection" process, and re-apply the cleaning process only after the re-inspection is qualified; the cleaning head and process are configured according to the interface structure.

Offsoon Pro Fiber Endface Cleaning Machine
Advantages of the plan
1.Comprehensive indicator coverage
It fully verifies insertion loss, splitting ratio, port uniformity, PDL, reflection loss, and directional characteristics, covering the core optical performance requirements specified in the optical splitter specification.
2.Fine-grained testing of each port
Data is collected separately for each output port, enabling quick identification of single-path power anomalies and facilitating the location of defects and failure analysis.
3.Full polarization state scanning verification
Using a polarization controller, traverse polarization states to capture PDL fluctuations, avoiding missed judgments caused by fixed polarization tests, and matching the random polarization usage scenarios of the on-site optical path.
4.Standardized testing process
The parameter calculation method and testing sequence are unified, making the operation reproducible. Data from different testers and samples from different batches can be compared horizontally, facilitating data archiving.
5.Realistic condition simulation
Test under the nominal working wavelength and rated input optical power of the device, identifying the risks of uneven splitting, end face reflection, and port crosstalk in the on-line application in advance.
6.Rich data dimensions
Output both splitting ratio and port consistency indicators, which can verify the designed splitting ratio and assess the power balance ability of multiple output paths.