Active Electrical Cable (AEC) Testing Solutions

The AEC active cable processes high-speed electrical signals through the active components at the ends. Besides the quality of bidirectional transmission, attention should also be paid to the power supply at both ends and the operating power consumption. Dimension provides an overall cable testing solution covering transmit and receive tests, bit error tests, and power consumption measurement, helping the production process evaluate both link performance and power consumption simultaneously.

Plan Introduction
Advantages of the plan
Related Products

AEC Active Cable Test - Dual end Test Connection.png

AEC Active Cable Measured Device Diagram



被测器件.png

The AEC copper cable component with source signal processing units at both ends is tested based on packaging, channel count, and connection type (direct connection or branching structure).

Our solution

We offer a comprehensive test solution for AEC active cables, including transmission and reception, bit error rate, and power consumption. The dual-end configuration, channel transmission and reception verification, bit error analysis, and power supply measurement are integrated into a unified process. The power consumption and transmission results of both ends are correlated with the working mode to form a cable judgment and abnormal record, assisting in the trial production introduction, mass production screening, and delivery review of AEC products.

Transmission and Reception Testing

Dual-end BERT and AEC compatible interface

Two independent BERT endpoints are used to complete the transmission and reception from A to B and from B to A respectively. The bit errors, lock loss, and operational abnormalities of each channel are recorded. The interface board is responsible for high-speed connection, DUT power supply, and supported management access. When FEC-related statistics are required, the corresponding functions are configured according to the test platform and working mode, and the results are associated with the port status to evaluate the transmission performance of the entire cable.

S12_LPO光模块测试-08.png

Power consumption test

Dual-ended programmable power supply and voltage/current measurement unit

Measures the voltage and current at both ends of the AEC power supply input, records the steady-state power consumption under the specified working mode, and summarizes the overall cable power consumption in a consistent manner. It can observe the power consumption changes during startup or mode switching according to project requirements; the transient project is configured with corresponding sampling resources.

Status monitoring and automation

Status collection and cable testing software

During the testing process, collect supported temperature, alarm, and management status, associate events with errors, power consumption, and testing stages. The software organizes tests, re-tests, and report outputs by model, enabling the evaluation of transmission performance and power consumption requirements within the same process.

The measurement range and summary口径 of the power consumption at both ends must be consistent. The power consumption of the workstation and fixture itself is handled separately. The FEC statistics are configured according to the test platform or equipment capabilities.

Typical test process

  1. Dual-ended power supply and identification

  2. Configuration and transmission verification

  3. Bidirectional error code testing

  4. Power consumption and status recording

  5. Cable determination and report

Advantages of the plan

Enhanced production capacity

Joint evaluation of transmission and power consumption

Summarize bidirectional bit errors, power consumption at both ends, and working modes in the same product record, supporting comprehensive judgment of product quality.

Unified management of dual-end configuration

Call port configuration, channel mapping, and test procedures by model, connecting direct connection and branch products for batch testing.

Easy association of abnormal events

Link loss of lock, disconnection, alarms, and power supply changes with the test stage, retain initial and retest records, and assist in locating abnormal conditions.


Easily access services and support from Dimension
Want help or have questions?