Linear Pluggable Optics (LPO) Testing

Dimension Technology offers solutions covering launch testing, reception testing and error code verification, evaluating the performance such as output quality and reception capability of the module.

Plan Introduction
Advantages of the plan
Related Products

Linear Pluggable Optics (LPO) Testing.png

LPO Optical Module Test Component Diagram

S12_LPO光模块测试-06.png

Launch test

OPM optical power meter and optical sampling oscilloscope

The BERT code type output is driven by the driver module of the LPO interface board to the transmitting end. The transmitted light is connected to the optical power meter or the optical sampling oscilloscope through the selected optical switch. The OPM completes the optical power measurement, and the optical sampling oscilloscope completes the analysis of the applicable optical waveform and modulation indicators. The trigger or reference clock is provided according to the oscilloscope scheme. When necessary, configure the matching clock recovery resources. Each measurement path is selected separately at different times.

S12_LPO光模块测试-03.png

S12_LPO光模块测试-02.png

Reception test

Reference modulation light source, POA attenuator and electrical reception analysis

The independent reception test is generated by the code pattern source and the reference light emitter, which modulates the light signal and then passes through the POA attenuation before being connected to the LPO receiving end; the module's electrical output is sent through the interface board to the matching reference electrical reception and error code analysis resources. First, the optical power at the reference surface of the DUT's input is calibrated, and then the results under different input conditions are evaluated. If the DUT's own emitted light is used for the feedback loop, the results are used for the corresponding link screening and do not directly replace the independent reception evaluation.

S12_LPO光模块测试-05.png

Optical path switching

OSW optical switch

During multi-channel testing, the channel to be tested is connected to the corresponding measurement path through the optical switch, and the channel selection and data acquisition are completed in conjunction with the host computer. The switching configuration can be selected based on the optical interface, working wavelength band and channel layout, reducing the need for manual line replacement and supporting the sequential execution of transmission and reception projects.

S12_LPO光模块测试-07.png

Error code test

High-speed error code instrument and LPO electrical interface adapter unit

By using matching code patterns for excitation and electrical reception analysis resources, record the error codes and lockout events of each channel under the specified host-side conditions. Associate the error code results with the transmission and reception measurements to evaluate the transmission performance of the complete test link. The platform selection must match the LPO linear architecture, signal rate, and equalization requirements.

S12_LPO光模块测试-08.png

Clock Recovery

CR600 60Gbaud Optical Clock Recovery Unit

CR600 optical clock recovery unit supports NRZ and PAM4. It can provide optical clock signals recovery within the 60Gbd range. The system integrates a single multimode optical conversion and clock recovery circuit, which can be applied simultaneously in electrical and optical applications. It meets the requirements of high sensitivity and low inherent jitter, and has excellent measurement accuracy.

2025121015115729.png



Advantages of the plan

Increase production efficiency

Standardize data transmission and reception testing procedures

Organize the transmission, reception and bit error items into the same test sequence. Call the channel settings and judgment conditions according to the model, reducing repetitive operations.

Improve the efficiency of multi-channel testing

Arrange the measurement sequence through optical path switching and instrument linkage, reducing manual line changes, and configuring workstation resources according to the production rhythm.

Support rechecking of abnormal channels

Link the optical power, waveform evaluation, receiving conditions and bit error results to provide a basis for retesting of abnormal channels and batch quality analysis.


Easily access services and support from Dimension
Want help or have questions?