Fiber Optic Connectors & Assemblies
CPO and OCS Switch In-Chassis Optical Interconnect Assembly Test Solution
As the AI computing infrastructure continues to evolve towards 800G, 1.6T and higher speeds, CPO and OCS switches extensively adopt high-density optical interconnection components such as MPO/MTP jumper cables, multi-core optical devices, optical BOXs and MT connectors within their internal structures. Any misconnection, fiber breakage, excessive loss deviation or end-face contamination in any channel can lead to a decline in link performance or even a complete system failure. Dimension Technology has established a full-process quality closed-loop of "channel mapping - insertion loss/back loss - end-face detection - cleaning and re-inspection - loss re-measurement" using FPT, RLM, MT-SCOPE and Offsoon Pro.

Test subjects and advantages of the plan
Suitable object
Incoming inspection, production testing, assembly verification and fault location for the internal optical interconnection components of CPO/OCS switches.

Advantages
·The three tests are complementary to each other.
Map the connection relationships, verify the optical performance with IL/RL, and inspect the physical interfaces at the end faces to avoid misjudgment solely based on the conduction or loss results.
·Multi-channel programmable
FPT supports 2-24, 2-32, and 2-72 channels, and is compatible with SM/MM; RLM can be flexibly configured according to the type of optical fiber, wavelength, and channel scale.
·The cleaning effect can be verified
After the Offsoon Pro non-contact cleaning process, the end faces are rechecked using the MT-SCOPE method, and the relevant channels are retested using RLM. There is no need to substitute the number of cleaning processes for the determination of qualification.
·Channel-level quality traceability
Unify the component SN and channel number, link the polarity, IL/RL, end face image, cleaning procedure and final determination, to facilitate the review of abnormalities.
Related products
Channel Mapping
FPT Programmable Polarity Detector
FPT adopts a platform-based design that combines a test platform with test modules. Users can freely select the number of channels, edit and save polarity schemes, and also establish detection tasks through intelligent learning based on standard samples. The equipment presents the test results in real time. The non-contact port design is suitable for PC and APC connectors and can be used for polarity testing of MPO/MTP, multi-channel optical devices, and optical boxes.

Insertion loss / Return loss
RLM Multi-core Insert Return Loss Meter
RLM employs highly stable light sources and high-precision optical power meters to achieve non-wound return loss testing and high-speed insertion loss testing. It can simultaneously obtain IL and RL in an integrated test. The platform-based and modular architecture supports configuration based on fiber type, wavelength, and channel scale. The optimally designed integrating sphere can measure dense multi-channel MTP/MPO connectors as well as dual LC and other devices.

End face inspection
MT-SCOPE Portable Optical Fiber End Face Detector
The MT-SCOPE comes with a high-definition flip touchscreen and independent computing power. It can be powered on and used for detection without the need for an external computer. The device supports auto focusing, auto exposure, and auto measurement, and can capture complete images of multiple fiber core ends at one time. It has a variety of fixtures that can be used to adapt to high-density connectors such as high-speed optical modules, SN-MT, MMC, MXC, etc., as well as complex multi-fiber devices.

End face cleaning
Offsoon Pro Fiber End Face Cleaning Machine
Offsoon Pro is an integrated automatic fiber optic end-face cleaning machine for single and multi-core fibers. It adopts a non-contact cleaning principle of liquid and gas, and is equipped with an air filter, oil mist separator and micro mist separator. The equipment has a display screen and a keypad, and the liquid spraying, gas spraying and suction time can be edited. It can save cleaning programs. It has rich interfaces for cleaning single/multi-core connectors, optical modules, TOSA/ROSA and MT insertion cores, etc. of end faces.
