Shuffle Fiber Interconnect Assemblies

The Shuffle optical interconnection module is an inductive optical re-routing device. Inside, it re-cross-links and re-arranges multiple optical channels according to the preset mapping relationship, without performing photoelectric conversion. It is mainly used in AI clusters and CPO switches to achieve the reshuffling of optical channel lanes and the distribution of multi-plane traffic, thereby solving the problem of mismatch between the port sequence of the optical engine and the switching plane.

Plan Introduction
Advantages of the plan
Related Products

Scheme Introduction

    This scheme builds a test optical path using tunable light sources, polarization controllers, high-precision optical power meters, and echo loss testers. Under the nominal working wavelength and rated optical power of the device, it sequentially tests the insertion loss, polarization-dependent loss (PDL), and echo loss (RL) for each fiber channel of the Shuffle optical interconnection component. At the same time, it verifies the channel shuffling mapping relationship, polarity, and consistency of fiber length. It collects data for different polarization states and verifies the optical transmission performance and channel layout accuracy after passive rearrangement interconnection, ensuring the quality of high-speed signal transmission and meeting the usage requirements of CPO/AI cluster interconnection.Shuffle Fiber Interconnect Assemblies.png

 

Core test parameters

Channel insertion loss IL: The total optical power attenuation generated when a single-channel optical signal passes through the connector, splicing point, and internal optical routing. It directly affects the optical budget of high-speed links.

Polarization-dependent loss PDL :The maximum difference in insertion loss of the same channel as the incident light polarization state changes, indicating the sensitivity of the device to polarization.

Return loss RL (for each port):   The level of reflected light along the original path generated at the port end face and splicing position. Excessive reflection can cause instability of the light source and jitter of high-speed signals.

Channel shuffling mapping relationship: The core indicator of the Shuffle component, representing the fixed rearrangement and pairing logic from the input fiber core sequence to the output fiber core sequence. Different from ordinary direct optical cables.

Connector polarity :The definition of A/B polarity for MPO connectors. Incorrect polarity will cause the transmission and reception channels to be reversed and the link to be non-functional.

Fiber length / delay consistency (optional in CPO scenario): The deviation of the physical length of each channel. A significant deviation in length can lead to a time delay difference between channels, affecting the synchronization of parallel high-speed signals.

 

Retracted loss polarity test

High-performance polarity reinsertion loss tester


The non-wrapping reinsertion loss tester is based on the optical time domain discrimination principle. It does not require the wrapping of the optical fiber tail fibers, and can simultaneously complete the rapid integrated detection of insertion loss, return loss, and polarity. It is suitable for production line testing of non-wrappable samples such as Shuffle components, MPO multi-core cable bundles, and fiber jumpers.


CPO与OCS交换机机内光互连组件测试方案-04(1).png


Multi-channel optical path switching

Optical Switch

By using the optical switch to connect different measurement channels or testing instruments, the need for repeated plugging and unplugging is reduced, making it easier to construct a multi-channel testing process. OSW can be configured according to the number of channels and interface forms; for applications requiring light input monitoring, a testing system can be built in combination with a power monitoring scheme. The PER measurement link needs to be verified separately to avoid the impact on results due to the change of polarization state when switching the link.

光开关.png

                                                                                             Optical Switch


Optical fiber end face defect detection

FastCheck Pro Fully Automatic Fiber Endface Inspector

EasyGet WiFi Wireless Fiber Endface Microscope

MT SCOPE  Fiber Endface Microscope

Check for contamination, scratches and other defects on the connection end face, reducing interference to power and polarization measurements caused by the connection status. FastCheck Pro supports automatic centering, focusing, exposure and measurement, suitable for bench-top detection and integration with automation; EasyGet WiFi supports wireless transmission, automatic analysis and report output; MT SCOPE comes with a touch screen and can independently complete on-site detection and determination. Specific interfaces require corresponding adapters.

2026110709504671.png


                                                               Fiber Endface Inspector


End face cleaning

Offsoon Pro Fiber Endface Cleaning Machine

It adopts a non-contact cleaning method combining cleaning solution and dust-free gas to remove oil stains and adhered contaminants on the connection end face. It is recommended to confirm the end face condition following the "inspection - cleaning - re-inspection" process, and re-apply the cleaning process only after the re-inspection is qualified; the cleaning head and process are configured according to the interface structure.

2026110709503381.png

                                              Offsoon Pro Fiber Endface Cleaning Machine




Advantages of the plan

1. Integrated verification of optical and sorting functions

Simultaneously complete the detection of passive optical performance and the verification of the core channel rearrangement relationship, taking into account both the link transmission indicators and the unique core sequence mapping requirements of Shuffle.

2. Verification by checking each core according to the wiring sequence mapping table

Verify each channel by performing light testing according to the defined input-output core sequence relationship, efficiently detecting assembly defects such as faulty cores, misordered sequences, and channel cross-connections.

3. Meeting the signal integrity requirements of CPO high-speed interconnection

Focus on controlling insertion loss and return loss, suppressing signal degradation caused by polarization fluctuations and end-face reflections, and adapting to 800G/1.6T high-speed optical engine links.

4. Assessing channel delay consistency

Utilize OTDR to test the length deviation of each optical fiber, identify problems such as excessive delay differences between channels, ensure synchronous transmission of parallel high-speed signals.

5. Adapting to the multi-port high-density characteristics of components

Standardized sequential channel traversal testing process, suitable for batch factory inspection of multi-core, multi-port Shuffle components.

6. Clear and traceable determination basis

Use the official version of the shuffling mapping drawing as the determination benchmark, with complete test records and good repeatability, facilitating incoming material inspection and delivery archiving.



Easily access services and support from Dimension
Want help or have questions?