New FA/JUMPER Connector Test Solution, One-stop & High Efficiency!
2024.06.24

维度科技.gif


Dimension Technology’s multi-core polarity insertion and return loss meter is an innovative solution widely recognized by customers. Building on this foundation, we have launched an upgraded one-stop FA/JUMPER test solution. It accommodates FA devices with various branch counts and angles, delivers fast IL, RL and polarity testing, and improves production inspection efficiency.



Key Advantages


· Supports single-mode and multi-mode FA device testing

· Customizable wavelengths

· One-stop IL, RL and polarity testing, no two-end mating required

· FA-dedicated return loss mode for more accurate ranging lock

· Patent-protected vision-based polarity detection

· Abundant FA fixture interfaces for easy replacement

· External probe interface compatible with multi-branch FA and Z-BLOCK devices

·Upgradeable from existing polarity insertion & return loss meters for low-cost iteration

· Custom Archimedes integrating sphere available for testing FA with over 2000 cores


FA-JUMPER-1.png



1.Versatile interface design with multi-dimensional precision adjustment for optical assemblies.



FA/JUMPER Test

Fixture-and-interface design enables quick operation, stable clamping without scratching end-faces and minimizes measurement errors.


1)Upgraded light-tight integrating sphere with input aperture >10 mm;


2) Multi-dimensional adjustable optical platform supports simultaneous multi-port testing. The optical assembly reserves sufficient adjustment degrees of freedom. When switching DUTs, manually adjust to the proper position and angle for the new device under test.


2026111917084949.png



2.One-step IL, RL and polarity testing



FA/JUMPER Test

FA/JUMPER devices cannot be directly mated with the MPO interface of polarity testers, which invalidates the conventional polarity test method for TOSA/ROSA arrays. Dimension Technology’s industry-first patent vision-based polarity detection scheme effectively solves this pain point. Integrated inside the insertion & return loss meter, it allows users to test IL, RL and polarity of FA/JUMPER devices in one step simply by connecting the DUT.


FA-JUMPER-3.png


For multi-branch devices or high-core-count fiber arrays (2000+ cores), light collection is achieved via a high-capacity integrating sphere. The software intelligently arranges polarity sequences and generates reports automatically.

FA-JUMPER-7.png




3.Return Loss Optimized Test



FA/JUMPER Test

Coil-free return loss meters based on OTDR principle suffer from blind spots when testing ultra-short connectors without special treatment. For coiled return loss meters using OCWR method, the return loss of MT on the Rx side of MT-FA devices cannot be measured unless index-matching gel is applied to suppress terminal FA reflection. Dimension Technology’s solution optimizes the OTDR search algorithm for FA applications, enabling reliable measurement of Rx-side MT return loss.


FA-JUMPER-4.png




4.Stable and repeatable test results with high accuracy



FA/JUMPER Test


With the optimized algorithm and index-matching gel applied, MT return loss readings are stable and accurate. Below are the mean and variance of insertion loss and return loss obtained from 10 repeated measurements on the same MT-FA device:


FA-JUMPER-5.png




Dimension Technology’s new FA/JUMPER connector test solution comes with feature-rich, customizable software with database support. It can measure IL and ISO isolation on the Tx side, as well as IL and RL on the Rx side. Built on a unified platform architecture, it supports integration with Dimension’s end-face inspection and interferometer testing modules.

For more details, please contact Dimension Technology!

FA-JUMPER-6.png