Dimension OPM series modules include general-purpose series, high-speed series, high-power series, high-sensitivity series and  external detector series. All modules are compatible with Dimension ALPHA and OMEGA universal optical test platforms. Through the platform based test solution we can provide faster, more accurate and more flexible power measurement solutions, including the measurement of weak signal and the detection of tiny signal jump, as well as the accurate measurement of ultra-high light power.

For user convenience and maximum flexibility, Dimension provides a wealth of interchangeable detector adapters (Applicable to various fiber connector types,as detailed in the attached table below), as well as an fiber clamps that allow the bare fiber power measurement. The product comes with FC adapters in the form of a standard accessory, and also provides an external detector extension cable for remote head user selection.

Platform + Modular design

All OPM modules are compatible with ALPHA and OMEGA universal optical test platforms. Through software programming control, it can work with other dimension functional test modules and realize one-stop automatic test solutions. 

General-purpose series

Key Features

• One, two or four detectors on a single module

• Wavelength range：850nm~1650nm

• User-configurable trigger input and analog output

• Compatible with single-mode and multimode fiber

Applications

• Optical devices power measurement

• Manufacture automated optical power measurement

Specifications［4］

High-speed series

The high-speed OPM module designs and adopts the high-speed sampling circuit, in high speed mode, can provide 10 KHZ(MAX) power data acquisition speed, and 10 million measured data buffer size (per channel). Cooperate with the Dimension SLS light source, It provides an efficient and low-cost test solution for the fast scan test of passive devices.

Key Features

• One, two or four detectors on a single module

• Wavelength range：850nm~1650nm

• Up to 10 million measured data buffer size (per channel)

• Provide 10 KHZ(MAX) power data acquisition speed

• User-configurable trigger input and analog output

• Compatible with single-mode and multimode fiber

Applications

• Optical devices power high-speed measurement

• Manufacture automated power high-speed measurement

• Laboratory application

Specifications［4］

High-power series

Key Features

• One, two or four detectors on a single module

• Wavelength range：850nm~1650nm

• Up to +26dBm, +36dBm two high-power model options

• User-configurable trigger input and analog output

• Compatible with single-mode and multimode fiber

Applications

• Amplifier characterization test

• Absolute power measurement

• Laboratory application

Specifications［4］

High-sensitivity series

Key Features

• Wavelength range：850nm~1650nm

• Up to -90dbm weak signal detection and wide dynamic range (100dB)

• User-configurable trigger input and analog output

• Compatible with single-mode and multimode fiber

Applications

• Optical weak signal power measurement field

• Laboratory application

Specifications［4］

       General Specifications

Remark：

［1］Not contain noise and drift, CW model, 1000 to 1600 nm.

［2］The temperature is 23°C ± 1°C, using a non-angle FC connector, 1550nm wavelength, the power is constant

［3］The temperature is 23°C ± 1°C, using a non-angle FC connector, 1000 to 1640 nm wavelength, When the wavelength is less than 1000 nm, the uncertainty of 1% is increased, and when the wavelength exceeds 1640 nm,the uncertainty is increased by 6%.

［4］The test fiber type was standard SM 9/125 fiber and MM 62.5/125 fiber

Detector Adaptors Selection Guide

Ordering Information

eg. OPM2212A High speed OPM, 2CH, 2mm InGaAs detector, MAX power +10dBm